| | 
| | | | | | | |
| | No. | Features | color | Viscosity
mPa.s(cP) | Fill the gap | Shear strength
N/mm²/psi | Operating temperature
(℃) | Curing speed
Initial solid / Full solid |
| |
| | 603 |
Oil resistant
● Low viscosity, high strength, good oil resistance, stain resistance
● Suitable for press-fit assembly of motor, fan shaft, compressor shaft, gear and drive shaft (maximum clearance up to 0.1mm)
● Fast solidification in 10 minutes
| green | 100~150 | 0.10 | ＞22.5 / 3,260 | -55°C ~ 150°C | 10 minutes / 24 hours |
| | 609 | General purpose
● Can withstand temperatures up to 150 ° C
● Low viscosity, high strength
● Suitable for press-fit assembly of motor, fan shaft, compressor shaft, gear and drive shaft (maximum clearance up to 0.1mm)
● Fast curing in 10 minute
| green | 110~140 | 0.10 | ＞15.8 / 2,290 | -55°C ~ 150°C | 10 minutes / 24 hours |
| | 638 | High strength type
●High strength, high load resistance, difficult to disassemble, suitable for occasions with large gaps.
●Fast curing in 5 minutes to improve work efficiency.
●Chemical resistant solvent
●For dynamic load or periodic load, it can hold the clearance to achieve 0.23 shaft hole fit. | green | 2000~3000 | 0.25 | ＞ 25.0 / 3,625 | ﹣55℃~150℃ | 5 minutes / 24 hours |
