0
Price inquiry
Home
IP640
Fine thread
█ Explanation：Indexing Plunger applies to the case of manually positioning. Generally d pin is convex.
█ Reset type：1. Pull the knod up, latch sink into the boody, positioning can be relieved.
2. Release knob, the force of the internal spring can restore pin protruding state.
█ Latch type：1. Pull the knob up and rotate 90 degrees, latch sink into the boody, positioning can be relieved.
2. Rotate 90 degrees and release knob, the force of the internal spring can restore pin protruding state.
D Knob : Nylon 6(Mat Black)
█ Reset type：1. Pull the knod up, latch sink into the boody, positioning can be relieved.
2. Release knob, the force of the internal spring can restore pin protruding state.
█ Latch type：1. Pull the knob up and rotate 90 degrees, latch sink into the boody, positioning can be relieved.
2. Rotate 90 degrees and release knob, the force of the internal spring can restore pin protruding state.
D Knob : Nylon 6(Mat Black)
| Main part | d Pin | Spring | Affiliated nuts | |||
| Material | Finish | Material | Finish | Material | Finish | |
| Steel | Black oxide | Steel 50~60HRC | Black oxide | SWP-B | Steel | Black oxide |
| SUS303 | - | SUS303 | Nickel plating | SUS301 | SUS303 | - |
How to order?
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| unit:mm | |
| M | Pitch | d | -0.02 | S | L | D | E | e1 | e2 | e3 | Sw1 | Sw2 | Load (N) | ||
| -0.04 | Resetl | Lock | Steel | SUS | |||||||||||
| M10 | 1 | 5 | 5 | 45 | 51 | 21 | 13.8 | 17 | 5 | 5 | 12 | 17 | 7~17 | 6~15 | |
| M12 | 1.5 | 6 | 6 | 54.4 | 61 | 25 | 16.2 | 20 | 6 | 6 | 14 | 19 | 9~24 | 8~21 | |
| M16 | 8 | 8 | 69 | 75.5 | 31 | 21.9 | 26 | 8 | 8 | 19 | 24 | 11~30 | 9~26 | ||
| M20 | 1.5 | 10 | 10 | 80 | 91 | 25.4 | 33 | 10 | 10 | 22 | 30 | 19~45 | 17~40 | ||
|
| kgf=NX0.102 | |||||||||||||||